manualshive.com logo in svg

LG 27HJ710S, Owner'S Manual, Page: 24 / 56

Share
Download
LG 27HJ710S Owner'S Manual Download Page 24

ENGLISH

24

  6  

DP IN

 / 

DP OUT 

Connector

 - Receives or transmits digital video signals. 
 - There may be no video output depending on the DP (DisplayPort) version of your PC.
 - A cable with DisplayPort 1.2 specifications is recommended when using a Mini DP to DP (Mini DisplayPort 

to DisplayPort) cable.

  7  

SERVICE ONLY

 Connector

 

-

The USB port is used for service only.

  8  

5 V 

 0.9 A

 (USB Connector)

 -Used for HW Calibrator (Optional Accessory) connection.
 -A keyboard, mouse or USB device can be connected.

 CAUTION

Precautions for Using USB Storage Devices

 

•

A USB storage device installed using an automatic recognition program or its own driver may not be 

recognizable. 

 

•

Some USB devices may not be supported or may not work properly.

 

•

It is recommended that you use a USB hub or hard disk drive with power supplied. (If insufficient power is 

supplied, the USB storage device may not be detected properly)

 5 V 

 0.9 A / 

 (USB Connector)

 - Connect your accessory to the USB input port.
 - To use USB 3.0, connect a USB 3.0 Type A-B cable to your PC.

 NOTE

 

•

All signal OUT connectors (SDI, DVI, DP) output signals when the monitor's power switch is on. Signals are not output 

when the power switch is off.

 

•

This monitor supports the *Plug and Play feature.
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure anything or 

install any manual drivers.

Summary of Contents for 27HJ710S

























































Reviews:

No comments