4-6. Setting the Installation Menu (2/2)
Menu
Description
Signage Mode
Operation
Decide to work all functions of 'Signage Mode Operation' or not.
15Min Force Off
Turns off the monitor if there is no input for more than 15 minutes.
"No" is the recommended default value setting.
4 hours off
Turns off the monitor if there is no input on the remote control for more
than four hours."No" is the recommended default value setting.
Wake On LAN
Turns on the monitor remotely using LAN.
Total Set ID
Sets the maximum value for picture IDs.
DPM
Enters energy saving mode if there is no input signal.
Software Update
Sets whether to use NSU (Network Software Update).
Power On Status
Decide to select working status of Monitor Set when turn on main power.
Input Source
Change
Decide to change input source or not by setting 'Input Source Change' as
Yes(Change possible) or No(Change impossible).
Menu Display
MENU key does not work if 'Menu Display' is set to No.
OSD Display
Decide to display OSD or not by setting 'OSD Display' as Yes(Mark)
or No(No Mark).
Min Volume
Decide 'Min Volume' between changing range 0 to 100.
Max Volume
Decide 'Max Volume' between changing range 0 to 100.
Power On Default
With the power turned on, you can set the 'Input Source' and 'Volume’
options.
Input Source
Set whether it is turned on by the set input source or by the last stored
input source.
Volume
This sets whether to apply the Volume Level or not when the power
is turned on.
Aspect Ratio
With the power turned on, you can set the 'Aspect Ratio' option with the
pre-defined value.
Intelligent Auto
If the setting is Yes, Display is automatically arranged through
resolution size when you change the resolution at the first.
Factory Reset
If it is set to No, 'Factory Reset' under OPTION is disabled.
41
