WA
TCHING TV / CHANNEL CONTR
O
L
20
WATCHING TV /CHANNEL CONTROL
INSTALLER REMOTE CONTROL BUTTON FUNCTIONS
G
Bed 1 - Bed 2 switch on patient remote. The position of the Bed 1 - Bed 2 switch must correspond to the
setting in the Installer’s menu. The switch above can be set by sliding it to the Bed 1 or Bed 2 position. On
the patient’s remote, the Bed 1 or Bed 2 position can be selected by using a paper clip or a ball-point pen
to slide the switch to the correct position.
Left position = Bed 1.
Right Position = Bed 2.
NOTE
Optional Installer
Remote Control
A brief list of the buttons on the optional installer remote and what they do.
MUTE
Turns sound Off and On, while the picture
remains.
CHANNEL PREVIEW
Displays available TV channels, and (if
active) the Guest Parental Control menu:
set V-Chip blocks to restrict both analog
and digital programming.
• Aux Channel allows the guest to select
the Audio / Video inputs. (Use the A/V
jacks on the back of the TV as a source).
BANK
Press and repeat to select a Channel
Memory Bank - - 1, 2, 3 or 4 (Standby).
TIMER
Press repeatedly to select a preset time to
automatically shut the TV off.
[-] BUTTON
When selecting a digital broadcast
channel, key in the Main channel
number followed by the -> [-] -> then the
sub channel number. Analog channels do
not contain a sub channel number.
MENU
Press to display the main on-screen menu.
POWER
Turns TV On or Off.
INFO
Press to display current program information.
GUIDE
Use to view DTV program information.
FLASHBK (Flashback)
Use to return to the last channel viewed.
NUMBER BUTTONS
Use for direct channel entry.
CC (Closed Captioning)
Press to access closed captions.
ALARM
Use to go to the Alarm menu. Set a time for
the TV to turn itself on.
ADJ
D E F G
User ADJ (adjust) Up/Down menu arrows,
Left/Right to change the selected option.
BED 1/BED 2 (*See Note Below)
Determines the code set transmitted, Bed 1
or Bed 2. Switch setting must correspond to
item 27, HOSPITAL MODE setting in the TV’s
Installer Menu.
VOLUME / CHANNEL / OK (Enter)
Increase or decrease sound level.
Select available channels.
Select on-screen menu items and change
menu values.
SAP
Selects MTS sound: Mono, Stereo, and
SAP in analog mode. Change the audio
language in DTV mode.
Summary of Contents for 20LH1DC1
Page 70: ...APPENDIX 70 APPENDIX CLONE TROUBLESHOOTING FLOW CHART ...
Page 71: ...APPENDIX 71 TV OPERATING CHECK ...
Page 74: ...74 NOTE ...
Page 76: ......