LG SIGNATURE WD1610NSW, Owner'S Manual

Page: 35 / 64

35
EN
Option Programme
When you select a programme, washing starts
with the default settings. If needed, change the
options as shown below.
1
: Soil
2
: Rinse
3
: Temp.
4
: Spin
5
: Add Option
6
: Add Drying
(Optional)
1
Press the Power button.
2
Select a washing programme.
3
Select the options you want to change.
4
Change the options and press the
OK
button.
5
Press the Start/Pause button.
1
Soil
Light
Use this option when the soil level is lower than
a general washing.
Normal
Use this option for general washing.
Heavy
Select this option to wash heavily soiled laundry
using more power compared to the standard
wash for each programme.
2
Rinse
Rinse+
Adds one additional rinse.
Rinse++
Adds two additional rinses.
Rinse & Hold
The programme is paused until the start button
is pressed again when rinse has finished.
Rinse+ & Hold
Add an additional rinse then after the rinsing
process, the programme is paused until Start/
Pause button is pressed again.
3
Temp.
The
3
button selects the wash temperature
combination for the selected programme. Press
the desired setting. All rinses use cold tap water.
• Select the water temperature suitable for
the type of load you are washing. Follow the
garment fabric care labels for best results.
4
Spin
Spin speed level can be selected by pressing
the
4
button repeatedly.
NOTE
• When you select No Spin , it will still rotate for
a short time to drain quickly.
• The spin setting range may be different
depending on programmes.