LG SIGNATURE WD1610NSW Owner'S Manual Download Page 26

Page: 26 / 64

Dispensing Detergent Manually

You may disable the Auto Detergent function if

necessary.

•

To dispense a different kind of detergent

(powder detergent, neutral detergent, or

oxygen-based bleach) manually without

using the Auto Detergent function, use the

separately provided Rubber cup.

Turn off

Auto Detergent

function.

Put the detergent in the Rubber cup.

Put the Rubber cup into the drum.

NOTE

•

Dispense the detergent by referring to the

scale mark in the Rubber cup.

•

When washing is finished, wash the Rubber

cup clean before storing it.

•

To use fabric softener, turn on the

Auto

Softener

function.

•

Do not use the Rubber cup with the

Auto

Detergent

function turned on. Excessive suds

will remain even after rinsing, causing a longer

rinsing time or preventing a proper rinsing.

•

When you use the Delay Wash function, Auto

Dispense is recommended.

•

You may store the Rubber cup by folding it as

shown in the figure below.

CAUTION

•

Do not pour fabric softener directly on the

clothes.

•

Dispense the fabric softener using the Auto

Detergent function.

•

Put the Rubber cup in carefully to avoid

direct contact between the detergent and

the laundry. Detergent with strong bleaching

power may cause laundry discolouration.

•

Apply the recommended amount of detergent

as indicated by the detergent maker. Using

an excessive amount of detergent may leave

the laundry smelling of detergent residue after

washing.

Summary of Contents for WD1610NSW

































































Search results

Summary of Contents for WD1610NSW

Reviews:

Related manuals for WD1610NSW

Brands by name

Popular brands

LG SIGNATURE WD1610NSW, Owner'S Manual

Search results

Summary of Contents for WD1610NSW

Reviews:

Related manuals for WD1610NSW

Brands by name

Popular brands