LG-Nortel iPECS LIP-8004D User Manual Download Page 38

Page: 38 / 46

LIP-8004D User Guide

Issue 1

32 August,

2008

7.8 Contrast

The Phone LCD brightness can be adjusted to your
preference.

7.9 Network Config.

The user can review the current network configuration
or modify a new phone network configuration.

To change the Phone LCD Contrast:

•

While the phone is idle, press the VOL

▲▼

buttons.

•

VOL

▲

will increase darkness.

•

VOL

▼

will decrease dark (brightness).

To access Network Config. Settings:

•

Press

RANS

/PGM button and dial ##1,

•

Enter the password (default=147*), the following will display:

•

MFIM #1 –

CHANGE[#]

•

Press the # key to toggle between multiple profiles (MFIM),

•

Press

the

VOL

▲

VOL

▼

buttons to advance to the next

network configuration item,

•

Press

the

OLD

AVE

button to save each setting.

To set default Config settings:

•

In Network Config. Menu, use the VOL

▲

VOL

▼

buttons to

locate the Default Config Screen (shown),

Set default – [*]

•

Press the * key.

To exit Config. Settings:

•

Press the On Hook Dial button,

•

Press the * key to exit,

•

Press the # key to Reset/Reboot the phone with new settings.

Summary of Contents for iPECS LIP-8004D















































Search results

Summary of Contents for iPECS LIP-8004D

Reviews:

Related manuals for iPECS LIP-8004D

Brands by name

Popular brands

LG-Nortel iPECS LIP-8004D, User Manual

Search results

Summary of Contents for iPECS LIP-8004D

Reviews:

Related manuals for iPECS LIP-8004D

Brands by name

Popular brands