GDC-500H Wireless Handset
User Guide
44
4. Use the left or right arrow of the
Navigation
( ) button to select Yes or No.
5. Press the
OK
( ) left soft button to accept it.
6. Press the
End
( ) button.
5.6.14
Emergency Call
In emergency situations you can connect the designation number by pressing Emergency
button at the upper side of handset. The change of the designation number is available and
the default is Off.
To enable or disable Emergency call:
1. Select the Phone Settings menu from the User Menu.
2. Use the
Navigation
( ) button to highlight the Emergency Call selection.
3. Press the
OK
( ) left soft button to access the sub-menu.
4. Use the left or right arrow of the
Navigation
( ) button to select Yes or No.
5. Press the
OK
( ) left soft button to accept it.
6. Press the
End
( ) button.
5.7 Phone Register
To register a new wireless terminal to your base or to register a wireless terminal again after
base reset (refer to the Section Reset).
1. Press the
Menu
( ) button to display the User menu.
2. From the User Menu use the
Navigation
( ) button to highlight Phone Register.
3. Press the
OK
( ) left soft button. This displays the Phone Register menu.
LWS Subscription
Subscription
Base Choice
Modify PIN
Base ID
Reset
4. From the Phone Register menu select “Subscription” using the up and down arrows of
the
Navigation
( ) button and press the
OK
( ) button.
5. Select an available BASE station number and press
OK
( ) button. The GDC-500H
searches for the system, displaying and “Searching..x”. When a system is found, the
corresponding Radio Fixed Part Identification (RFPI) is displayed (verify the RFPI with
the System Administrator or Attendant).
5.7.1 LWS Subscription
In order to obtain services from a base station or zone, the handset must establish a
subscription with the zone. The handset may subscribe to base station or zone
simultaneously. When subscribing to the system you will need the RFPI and Authorization
code, which may be available from your System Administrator. Also, before starting the
subscription process make sure you are in range of the desired zone and the Received
Signal Strength Indicator (RSSI) indicator is steady, showing at least 2 bars.
Summary of Contents for iPecs GDC-500H
