GDC-500H Wireless Handset
User Guide
12
10. If the subscription fails, repeat procedure from Step 3 to 6 at the Attendant Station
and Step 1 to 8 from the GDC-500H (refer to Note).
Note:
Depending on the system or radio channel environment, the system or the wireless terminal
may not recognize that the system has the subscribed wireless terminal or the wireless
terminal is subscribed to the system. Once a user has performed the subscription procedure,
the user should attempt to make a call. Then, if a user can’t make a call, the subscription
procedure should be conducted again after selecting the unsubscribe menu item (refer to
Terminating a Subscription
section).
2.7.3 Terminating a Subscription
Unsubscribing will make a wireless terminal lose connection to the ipLDK-24/100/300/300E,
iPECS-50/100/300/300E/1200/MG WOTS. The subscription data of the phone (stored in
MPB and WTIB or the wireless terminal) should be erased separately at both User Station
and Attendant Station using the Unsubscribe procedure. To unsubscribe a wireless terminal,
it should be in an idle state.
To Unsubscribe from the Attendant Station:
TRANS/PGM
+ 0# +
Flex. Button 2 + Station No. +
HOLD/SAVE
1) Press
[TRANS/PGM]
button. (
[TRANS/PGM]
LED flashes and
[MON]
LED lights
steady.)
2) Press
0#
.
3) Press Flexible button 2.
4) Enter the station number.
5) Press
[HOLD/SAVE]
button and confirmation tone is heard.
6) Confirmation tone (or error tone) will be heard at the Station, and the corresponding
Attendant Station.
7) LCD message
“
No Subscription
”
will be displayed if there is no subscribed system.
In rare cases when subscription data must be deleted from a lost phone, etc., the following
procedure may be used.
To Unsubscribe users locally in the system from the Attendant Station:
To unsubscribe all wireless terminals at once,
TRANS/PGM
+ 0 #+
Flex. Button 7 + Password (147*) +
HOLD/SAVE
1) Press
[TRANS/PGM]
button (
[TRANS/PGM]
LED flashes and
[MON]
LED lights
steady).
2) Press
0#
.
3) Press Flexible button 7.
4) Enter the Password (default=147*).
5) Press
[HOLD/SAVE]
button and confirmation tone is heard.
6) Confirmation tone (or error tone) will be heard at the Station, and the corresponding
Attendant Station.
To unsubscribe one subscribed wireless terminal,
TRANS/PGM
+ 0 # +
Flex. Button 8 +
Station No +
HOLD/SAVE
1) Press
[TRANS/PGM]
button (
[TRANS/PGM]
LED flashes and
[MON]
LED lights
steady).
Summary of Contents for iPecs GDC-500H
