GDC-500H Wireless Handset
User Guide
43
3. Press the
OK
( ) left soft button to access the sub-menu.
4. Use the left or right arrow of the
Navigation
( ) button to select Yes or No.
5. Press the
OK
( ) left soft button to accept the selection.
6. Press the
End
( ) button.
5.6.11
Clock Display
When a host system does not provide the handset with the date and time, the handset clock
display can be enabled and the date and time set. The display can be enabled as outlined
below and the time and date are set as outline in the Clock, Date and Time Display section
earlier in this guide.
To enable or disable use of the handset date and time:
1. Select the Phone Settings menu from the User Menu.
2. Use the
Navigation
( ) button to highlight the Clock Display selection.
3. Press the
OK
( ) left soft button to access the sub-menu.
4. Use the left or right arrow of the
Navigation
( ) button to select Yes or No.
5. Press the
OK
( ) left soft button to accept the date.
6. Press the
End
( ) button.
Note:
If you set and enable the clock display and the host system provides time and date, when
you press the
Talk
( ) button before dialing, the display will change to the system
time and date. The handset date and time must be adjusted as outlined in the Clock,
Date and Time Display Section.
After changing the Clock Display, you must press the
Talk
( ) and
End
( )
buttons to activate the display.
5.6.12
Auto Answer Mode
You can select your phone to activate/deactivate Auto answer mode when lifting your phone
from the charger after incoming call alerting.
To enable or disable use of the handset auto answer:
1. Select the Phone Setting menu from the User Menu.
2. Use the
Navigation
( ) button to highlight the Auto Answer Mode selection.
3. Press the
OK
( ) left soft button to access the sub-menu.
4. Use the left or right arrow of the
Navigation
( ) button to select Yes or No.
5. Press the
OK
( ) left soft button to accept it.
6. Press the
End
( ) button.
5.6.13
Auto Release Mode
The Auto Release Mode allows you to disconnect a call automatically during a conversation
by putting the handset into charger. The default is ON.
To enable or disable Auto Release Mode :
1. Select the Phone Settings menu from the User Menu.
2. Use the
Navigation
( ) button to highlight the Auto Release Mode selection.
3. Press the
OK
( ) left soft button to access the sub-menu.
Summary of Contents for iPecs GDC-500H
