LG-Ericsson iPecs GDC-500H, User Manual

Page: 31 / 68

GDC-500H Wireless Handset
User Guide
18
To answer an incoming call:
1. Handset rings, the Call type icon flashes and Caller ID is displayed (if available).
2. Press
Talk ( ) button to answer a call; the phone icon ( ) and the Call type
display.
Note:
If the handset is in the Charger/base, lifting the handset out of the charger automatically
answers an incoming call. This function is available if Auto Answer Mode sets up
‘Enabled’.
To reject the incoming call and stop the incoming call signal:
1. Press the
End
( ) button, all signaling stops, but the caller hears ring-back tone.
3.7 Placing a Call on Hold
While you are on a call using the GDC-500H, you may place the caller in a waiting state
where the caller hears music on hold. This allows you to place another call or answer a call
waiting.
To place a call on hold:
1. Press and hold, 1 second, the right arrow on the
Navigation
( ) button. The call
is placed on hold and other party receives audio from the System music source. The
User’s GDC-500H receives dial tone form the system.
Note:
If a second call is waiting, the above procedure automatically connects the waiting call.
To place another call:
1. Press the
End
( ) button; the wireless terminal returns to an idle state.
2. Place second call in the normal manner.
To retrieve the held call:
1. Press and hold, 1 second, the right arrow on the
Navigation
( ) button; the held
call is re-connected.
3.8 Call Transfer
You can send an active call to another user of your LG-Ericsson system. You can announce
the transfer to the receiving party (Screened Transfer) or without an announcement
(Unscreened Transfer).
To transfer an active call:
1. Press the
right arrow Navigation
( ) button; the call is placed on hold and dial
tone is received.
2. Dial the number of the internal user to receive the call.
3. To complete the transfer without announcement, press the
End
( ) button,
OR