LG-Ericsson iPECS ES-4526G, User Manual

Page: 758 / 1328

C
HAPTER
29
| Authentication Commands
802.1X Port Authentication
– 758 –
ES-4500G Series
dot1x port-control
This command sets the dot1x mode on a port interface. Use the no form to
restore the default.
S
YNTAX
dot1x port-control { auto | force-authorized |
force-unauthorized }
no dot1x port-control
auto – Requires a dot1x-aware connected client to be authorized by
the RADIUS server. Clients that are not dot1x-aware will be denied
access.
force-authorized – Configures the port to grant access to all
clients, either dot1x-aware or otherwise.
force-unauthorized – Configures the port to deny access to all
clients, either dot1x-aware or otherwise.
D
EFAULT
force-authorized
C
OMMAND
M
ODE
Interface Configuration
E
XAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x port-control auto
Console(config-if)#
dot1x re-
authentication
This command enables periodic re-authentication for a specified port. Use
the no form to disable re-authentication.
S
YNTAX
[ no ] dot1x re-authentication
C
OMMAND
M
ODE
Interface Configuration
C
OMMAND
U
SAGE
◆
The re-authentication process verifies the connected client’s user ID
and password on the RADIUS server. During re-authentication, the
client remains connected the network and the process is handled
transparently by the dot1x client software. Only if re-authentication
fails is the port blocked.
◆
The connected client is re-authenticated after the interval specified by
the dot1x timeout re-authperiod command. The default is 3600
seconds.