LG-Ericsson iPECS ES-4526G User Manual Download Page 520

Page: 520 / 1328

HAPTER

| IP Services

Dynamic Host Configuration Protocol

– 520 –

ES-4500G Series

◆

Client-Identifier

– A unique designation for the client device, either a

text string (1-15 characters) or hexadecimal value. The information

included in the identifier is based on RFC 2132 Option 60, and must be

unique for all clients in the same administrative domain.

◆

Hardware Address

– Specifies the MAC address and protocol used on

the client. (Options: Ethernet, IEEE802, FDDI, None;

Default: Ethernet)

Setting Optional Parameters

◆

Default Router

– The IP address of the primary and alternate gateway

router. The IP address of the router should be on the same subnet as

the client.

◆

DNS Server

– The IP address of the primary and alternate DNS server.

DNS servers must be configured for a DHCP client to map host names

to IP addresses.

◆

Netbios Server

– IP address of the primary and alternate NetBIOS

Windows Internet Naming Service (WINS) name server used for

Microsoft DHCP clients.

◆

Netbios Type

– NetBIOS node type for Microsoft DHCP clients.

(Options: Broadcast, Hybrid, Mixed, Peer to Peer; Default: Hybrid)

◆

Domain Name

– The domain name of the client. (Range: 1-128

characters)

◆

Bootfile

– The default boot image for a DHCP client. This file should

placed on the Trivial File Transfer Protocol (TFTP) server specified as the

Next Server.

◆

Next Server

– The IP address of the next server in the boot process,

which is typically a Trivial File Transfer Protocol (TFTP) server.

◆

Lease Time

– The duration that an IP address is assigned to a DHCP

client. (Options: Finite, Infinite; Default: Infinite)

NTERFACE

To configure DHCP address pools:

Click IP Service, DHCP, Server.

Select Configure Pool from the Step list.

Select Add from the Action list.

Set the pool Type to Network or Host.

Enter the IP address and subnet mask for a network pool or host. If
configuring a static binding for a host, enter the client identifier or

hardware address for the host device. Configure the optional

parameters such as a gateway server and DNS server.

Summary of Contents for iPECS ES-4526G

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS ES-4526G

Reviews:

Related manuals for iPECS ES-4526G

Brands by name

Popular brands

LG-Ericsson iPECS ES-4526G, User Manual

Search results

Summary of Contents for iPECS ES-4526G

Reviews:

Related manuals for iPECS ES-4526G

Brands by name

Popular brands