LG-Ericsson iPECS ES-4526G, User Manual

Page: 656 / 1328

C
HAPTER
25
| System Management Commands
Line
– 656 –
ES-4500G Series
databits
This command sets the number of data bits per character that are
interpreted and generated by the console port. Use the no form to restore
the default value.
S
YNTAX
databits { 7 | 8 }
no databits
7 - Seven data bits per character.
8 - Eight data bits per character.
D
EFAULT
S
ETTING
8 data bits per character
C
OMMAND
M
ODE
Line Configuration
C
OMMAND
U
SAGE
The databits command can be used to mask the high bit on input from
devices that generate 7 data bits with parity. If parity is being generated,
specify 7 data bits per character. If no parity is required, specify 8 data bits
per character.
E
XAMPLE
To specify 7 data bits, enter this command:
Console(config-line)#databits 7
Console(config-line)#
R
ELATED
C
OMMANDS
parity (658)
exec-timeout
This command sets the interval that the system waits until user input is
detected. Use the no form to restore the default.
S
YNTAX
exec-timeout [ seconds ]
no exec-timeout
seconds - Integer that specifies the timeout interval.
(Range: 0 - 65535 seconds; 0: no timeout)
D
EFAULT
S
ETTING
CLI: No timeout
Telnet: 10 minutes
C
OMMAND
M
ODE
Line Configuration