4.5
Battery Pack Installation
Secure the battery pack to a wall to prevent it from moving. If the battery pack is installed
above the floor or on a platform, make sure that the wall or platform is capable of supporting
the battery pack’s weight.
4.5.1
Standing Type
1. Determine where the mounting brackets are to be
placed using the drill template.
2. Drill holes in the wall for the M6(0.25in) screw
anchors. The drilling depth should be at least 50mm.
3. Drive the screw anchors through the mounting
brackets into the holes.
4. Tighten the screws to a torque of 5Nm.
5. Assembly Base plate and module(rear side) on
bottom side by fastening bolt.(M8, 8point)