4.5.2
Wall Mounting Type
1. Determine where the mounting brackets are to be
placed using the drill template.
2. Drill holes in the wall for the M6(0.25in) screw
anchors. The drilling depth should be at least 50mm.
3. Drill holes in the wall for the M8(0.33in) screw
anchors. The drilling depth should be at least 50mm.
4. Drive the screw anchors through the mounting
brackets into the holes.
5. Tighten the screws to a torque of 5Nm.
6. Drive the screw anchors through the wall mounting
bracket into the holes.
7. Tighten the screws to a torque of 8Nm.
8. Assembly Wall Mounting bracket and module(rear
side) on bottom side by fastening bolt.(M8, 8point)
CAUTION
In case of wall mounting type, it needs to wall mounting bracket. (optional parts)
When installation of wall mounting type, need two person or more for installation.
CAUTION
Be careful of the reversed and dropped module
unexpectedly. One and more person should keep module
position not to be revered and dropped on the ground.
