5.
Commissioning
5.1
LED indicators
There are four LED indicators on the front of the battery packs to show its operating
status.
ON
: This indicator stays on while the battery pack is supplied with power for operation.
Charging
: This stays on while the battery pack is charging.
Discharging
: This stays on while the battery pack is discharging.
Warning
: This comes on when the battery pack is in a warning state.
5.2
Powering up the battery pack
Put the battery pack in operation by taking the following steps:
1.
Remove the top cover from the battery pack.
2.
Make sure that the circuit breaker switch is in the OFF position.
3.
Move the circuit breaker switch to the ON position to turn on the main
battery pack.
See if the battery pack is successfully initialized.
The power on indicator on the front should turn on.
4.
Close the top cover.
5.
Turn on the inverter.
