9
ASSEMBLY INSTRUCTIONS
1. To Install/Remove Battery Pack
To Attach Battery Pack
a.
Make sure that the spray trigger (A) and the
power switch (B) are in the off positions (not
depressed).
b.
Open the battery bay cover (G).
c.
Align the raised portion on the battery pack
with the grooves inside the battery bay, and
then slide the battery pack into the battery bay
as shown.
d.
Ensure that the battery-release buttons on the
battery pack snap into place and the battery
pack is secured to the tool before beginning
operation.
e.
Close the battery bay cover and make sure that it is closed securely.
NOTICE:
When placing the battery pack on the tool, be sure that the raised rib on the battery
pack aligns with the groove on the tool and the latches snap into place properly. Improper
assembly of the battery pack can cause damage to internal components.
To Detach Battery Pack
a.
Make sure that the spray trigger (A) and the power switch (B) are in the off positions (not
depressed).
b.
Open the battery bay cover (G).
c.
Press the battery-release buttons to release the battery pack.
d.
Pull backward on the battery pack to remove it from the tool.
e.
Close the battery bay cover and make sure that it is closed securely.
WARNING
• Battery tools are always in operating condition. Therefore, the spray trigger (A) and the
power switch (B) should be in the off positions (not depressed) when the tool is not in use or
when carrying the tool at your side.
Battery Pack Protection
To protect the life of the battery pack, the fogger will shut off when the battery’s charge
becomes too low. If this happens, remove the battery pack and charge it according to the
charger’s instructions.
1
Battery-release
button
G
