LEYRO LDT 2000, Manual

Page: 10 / 44

10
When the self calibration counter reaches 100% the thermometer enters its standard mea -
suring mode and is ready to use (fig 4). The blinking “+” sign near T1 means that probe in
channel 1 is beeing measured at the moment.
3.4 Stand- alone benchtop operation (without PC)
The LDT 2000 has been designed to make operating as simple as possible.
Follow steps from chapter 3.2.
3.5 Operation with PC and Thermometer Utility software
The Thermometer Utility software was developed for easy intuitive data acquisition from
the LDT 2000 thermometer. The software is available for Microsoft Windows Operating
Systems.
The software supports:
1. Monitoring measured parameters in time domain using adjustable scale display
2. Data acqiusiton and recording. Advanced controlls allow many options of starting /
finishing of recording.
3. Configuring the thermometer for stand-alone operation.
4. Recalibration of resistance measuring circuitry, reading and writing of the coefficient’s
memory.
The user will find detailed description of all functions and features under in Appendix B
Thermometer Utility software.
3.6 Operation with PC and custom software
User’s custom software or simple Terminal programs can be used to configure/ read data
from the thermometer. Appendix C contains detailed description of the communication
protocol.