16
FINAL INSPECTION
= OK
N = NOT APPLICABLE
WELDING/ADJUSTMENTS
Gate is welded secure to vehicle (mounting plates are welded to chassis frame).
Mounting plates are welded to cross bar tube.
Extension is welded to vehicle (12-2” or 3” welds across floor and gussets welded inside and out).
Corners and steps welded to vehicle. Steps are optional.
Reinforcement braces for corners and steps welded to cross members.
Battery box welded or bolted secure to cross members.
All bolts are tightened and secure.
ICC bumper bar tube installed (optional).
Lock block welded on tension arm right side (for safety latch rod).
ELECTRIC’S
Check that battery holds downs are anchored securely
Check battery(ies) for proper charge level. PROPER CHARGE LEVEL:
Check all wiring connections for tightness (batteries, switches, etc.)
Inspect and check all circuit breakers/fuses.
Charge line/power line (through cross members with rubber grommets if you prefer)
Charge line/power line (clamped to bottom of cross members with loom clamps)
Electric line from gate to power pack (through cross members with rubber grommets if you prefer)
Electric line from gate to power pack (clamped to bottom of cross members with loom clamps).
Check operation of toggle switches
HYDRAULIC/GREASE
Check reservoir for correct amount of fluid (platform should be open and down when checking)
Verify pressure relief valve set at 2500 psi.
Check hydraulic hoses, fittings, and cylinder for leaks.
Grease safety latch rod.
OPERATION OF GATE
Open and close lift gate. Observe for correct operation (platform folds and unfold properly)
Raise lift gate. (platform is level with floor of vehicle).
Lowering lift gate (platform brackets and tip of platform rest on the ground).
ICC bumper does not hit the ground when gate is all the way down with platform on the ground.
PAINTING AND SAFETY STICKERS
Repaint
where
needed
Check hydraulic cylinder rods for over spray
Install all safety and operation stickers
CUSTOMER:
LOCATION:
VEHICLE#:
LIFT GATE MODEL#:
LIFT GATE SERIAL#:
Summary of Contents for TSG Hide-A-Way
Page 5: ...5...
Page 7: ...7 TSG SILL CUTOUT...
