LEYBOLD 230110, Instruction Manual

Page: 4 / 56

4
GA130001441_002_C0
– 09/2016
4.5 Outputs and Inputs 15
4.5.1 Analog Output 15
4.5.2 External Control 16
4.5.3 Serial Interfaces 16
4.5.3.1 RS232 16
4.5.3.2 RS485 16
4.5.4 Profibus-DP 16
5. Installation 17
5.1 Supplied Equipment 17
5.2 Mechanical Installation 17
5.2.1 Rack Installation 18
5.2.2 Front Panel Installation 18
5.2.3 Benchtop Instrument 19
5.3 Connections 20
5.3.1 Rear Side of the Instrument 20
5.3.2 Mains Connection 20
5.3.3 Earthing 21
5.3.4 THERMOVAC Measurement Channels (TM 1 and TM 2) 21
5.3.5 PENNINGVAC Measurement Channel (PM) 21
5.3.6 Analog Output and External Control (Analog Output / Extern Control) 22
5.3.7 RS232 / RS485 Interface (Interface RS232 / RS485) 23
5.3.8 Profibus-DP Interface (Interface Profibus-DP) 23
5.3.9 Relay Output (Relay Output) 24
6. Operation 25
6.1 Front Panel 25
6.1.1 Display 25
6.1.2 Control Pushbuttons 26
6.2 Switching on and off 26
6.2.1 Switching on 26
6.2.2 Switching off 26
6.3 Operating Modes 27
6.4 Measurement Mode 27
6.4.1 Selection 27
6.4.2 Description 27
6.4.3 Pushbutton Functions 28
6.4.3.1 Measurement Channel Selection 28
6.4.3.2 Parameter Mode Selection 28
6.4.3.3 Switching the PENNINGVAC on 29
6.4.3.4 Switching the PENNINGVAC off 29
6.4.4 THERMOVAC Alignment 30
6.5 Parameter Mode 31
6.5.1 Selection 31
6.5.2 Parameter Groups 31
6.5.3 Operating Concept 32
7. Parameters 33
7.1 Switching Function Parameters (PArA SP) 33
7.1.1 Basic Terms 33
7.1.2 Configuring the Switching Functions 34
7.1.3 Adjustment Range 34