Leyard TWF Series, User Manual

Page: 17 / 76

~ 12 ~
User Manual for TWF Series LED Unit
The installation structure is provided with left and right connecting pieces (left) and upper and lower
connecting pieces (right)
Splicing figure for connection of the four types of installation structures, i.e. 1*1, 1*2, 2*1 and 2*2 via
connection pieces
III. Adjustable Mechanism
1. Installation of Adjustable Mechanism
Thread ST6.3 * 25 mm hex flange self-tapping screws through the installation hole in Layer D (marked as
2) and fix it with the installation interface (usually a laminated wood board used);
Use the M5 * 12mm cross-recessed screw to connect the connection piece to the fixing hole of the
connecting board (marked as 1), where the connection piece has the positioning and fixing functions;
Use a slotted screwdriver to make the forward and backward adjustment in the Z-axis adjustment
mechanism of Layer D (marked as 4), based on the adjustment range of -6-6 mm;
Use a 3mm hexagonal tool to make upward, downward, leftward and rightward adjustment in the XY-axis
adjustment mechanism (marked as 3 and 5) of Layer C, based on the adjustment range of-5-5 mm. There