manualshive.com logo in svg

Leyard Planar UltraRes Series, User Manual

Share
Download
Leyard Planar UltraRes Series User Manual Download Page 70

Advanced Settings Menu

64

Planar UltraRes Series User Manual

Keypad Lock

Lock or unlock the keypad. When it is enabled, all keypad presses will be ignored.

Options:

 Enable, Disable; 

Default:

 Disable

IR Remote Lock

Lock or unlock the remote control. When it is enabled, all remote control presses will be 
ignored.

Options:

 Enable, Disable; 

Default:

 Disable

IR Remote ID Code

Selects the IR remote code set accepted by the display

Options:

 00000-65535; 

Default:

 01785

Save All Settings to USB

Save all settings in the display to a USB flash drive. The saved file will be named 

Planar-settings.bin

 and will be saved in the root folder of the USB flash drive.

Note:

 A USB flash drive must be inserted into the USB-A connector prior to using this 

feature. The USB flash drive must be formatted as FAT32. This feature will not work with 
the NTFS file system.

Restore All Settings 
from USB

Restores all settings in the display from a USB flash drive. The settings file must be named 

Planar-settings.bin

 and must be located in the root folder of the USB flash drive.

Note:

 A USB flash drive must be inserted into the USB-A connector prior to using this 

feature. The USB flash drive must be formatted as FAT32. This feature will not work with 
the NTFS file system.

Save Diagnostics to USB

Save a diagnostic report to a USB flash drive to help Planar Technical Support 
troubleshoot any issues. The saved file will be named 

Planar-diagnostics.bin

 and will be 

saved in the root folder of the USB flash drive.

Note:

 A USB flash drive must be inserted into the USB-A connector prior to using this 

feature. The USB flash drive must be formatted as FAT32. This feature will not work with 
the NTFS file system.

Factory Reset

Return the saved settings in a system to their factory defaults

Firmware Update

Update the firmware for the display. Refer to the instructions on the firmware release 
package for more information.

Summary of Contents for Planar UltraRes Series









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands