manualshive.com logo in svg

Leyard Planar UltraRes Series, User Manual

Share
Download
Leyard Planar UltraRes Series User Manual Download Page 54

Advanced Settings Menu

48

Planar UltraRes Series User Manual

Menus and Messages Submenu

Menu Position

Move the OSD menu to a different location on the screen

Options:

 Center, Upper Left, Upper Right, Lower Left, Lower Right; 

Default:

 Center

OSD Transparency

Set the transparency of the OSD so that the image behind it can be seen. Higher values 
mean greater transparency.

Range:

 0~5; 

Default:

 0

OSD Timeout

Set the amount of time in seconds since the last keypress before the OSD menu 
automatically closes. If set to Off, the menu never automatically closes.

Options:

 Off, 10 Seconds, 30 Seconds, 60 Seconds, 120 Seconds, 240 Seconds; 

Default:

 

60 Seconds

Allow Pop Up Messages

Suppress messages that pop up automatically. When set to No, the source status 
message and the volume slider bar will not be displayed.

Options:

 Yes or No; 

Default:

 Yes

Allow Splash Screen

Enable or disable the splash screen during startup

Options:

 Enable or Disable; 

Default:

 Enable

OSD Rotation

Rotate the OSD menu so that it is readable if the display is mounted in portrait 
orientation

Options:

 Landscape or Portrait; 

Default

: Landscape

Summary of Contents for Planar UltraRes Series









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands