Lexus NX350h 2022, Owner'S Manual

Page: 665 / 804

24 Store the bottle in the luggage compartment while it is connected to the
compressor.
25 Taking precautions to avoid sudden braking, sudden acceleration and sharp
turns, drive carefully at under 50 mph (80 km/h) to your Lexus dealer that is
less than 100 km (62 miles) away for tire repair or replacement.
When having the tire repaired or replaced, make sure to tell the Lexus dealer that the
sealant is injected.
After using the emergency tire puncture repair kit, have the vehicle inspected and the
tire pressure warning valve and transmitter replaced by your Lexus dealer. Otherwise
the tire inflation pressure may not be able to be measured correctly.
Related Links
Function and operation of the power outlet (12 VDC)(P. 285)
Checking the specified tire inflation pressure(P. 587)
Decreasing the tire inflation pressure when a tire is overinflated
1 Disconnect the hose from the valve.
2 Install the air release cap to the end of the hose and push the protrusion on the
air release cap into the valve to let some air out.
3 Disconnect the hose from the valve, remove the air release cap from the hose
and then reconnect the hose.
4 Turn the compressor switch on for a few seconds and then turn it off and check
the tire inflation pressure.
If the air pressure is lower than the specified level, turn the compressor switch on again
and repeat the inflation procedure until the specified pressure is reached.
9-4. If a tire is flat
663
9
When tr
ouble arises