Lexus NX350h 2022, Owner'S Manual

Page: 65 / 804

Installing child restraint system using a seat belt (child restraint lock function
belt)
A child restraint system for a small child or baby must itself be properly restrained
on the seat with the lap portion of the lap/shoulder belt.
Install the child restraint system in accordance to the operation manual enclosed
with the child restraint system.
If the child restraint system on hand is not within the “universal” category (or the
necessary information is not in the table), refer to the “Vehicle List” provided by the
child restraint system maker for various possible installation positions, or check the
compatibility after asking the retailer of the child seat.
Rear-facing - Infant seat/convertible
1 Adjust the rear seat
If there is a gap between the child seat and the seatback, adjust the seatback until good
contact is achieved.
2 Place the child restraint system on the rear
seat facing the rear of the vehicle.
3 Run the seat belt through the child restraint
system and insert the plate into the buckle.
Make sure that the belt is not twisted.
4 Fully extend the shoulder belt and allow it to
retract to put it in lock mode. In lock mode,
the belt cannot be extended.
1-4. Preparations for safe driving with children in the vehicle
63
1
Befor
e driving