Lexus NX350h 2022, Owner'S Manual

Page: 172 / 804

NOTICE
■
Notes regarding shift lever and P position switch operation
Avoid repeatedly operating the shift lever and P position switch in quick succession. The
system protection function may activate and it will not be temporarily possible to shift the
shift position other than P. If this happens, please wait for a while before attempting to
change the shift position again.
■
When exiting the vehicle(driver's seat only)
Check that the shift position indicator shows P and that the parking brake indicator is
illuminated before opening the door and exiting the vehicle.
When the power switch is changed to ACC with the shift position held in
N
Performing the following operations allows the power switch to be set to ACC with
the shift position held in N.
1 Operate the shift lever and change the shift position to N when the hybrid
system is operating.
2 Return the shift lever to its regular position ( ● ).
3 Operate the shift lever to N and hold it there until the buzzer sounds.
4 Press the power switch within 5 seconds after the buzzer sounds.
Make sure to check that the buzzer sounds and "Holding N Push P Switch When
Done" is displayed on the multi-information display.
● To change to a shift position other than N, press the P position switch. The shift
position will be changed to P.
● Even if the hybrid system is not operating, by operating the shift lever and the power
switch, the power switch may be changed to ACC with the shift position held in N.
Make sure that the hybrid system is operating before performing the operation.
2-2. Driving procedures
170