Lexus NX350h 2022, Owner'S Manual

Page: 494 / 804

●
When the preceding vehicle is traveling at an extremely low speed
●
Immediately after the vehicle speed has been set
●
When the accelerator pedal is depressed
Curve speed reduction function
When a curve is detected, the vehicle speed will
begin being reduced. When the curve ends, the
vehicle speed reduction will end.
Depending on the situation, the vehicle speed will
then return to the set vehicle speed.
In situations where vehicle-to-vehicle distance control
needs to operate, such as when a preceding vehicle
cuts in front of your vehicle, the curve speed reduction
function will be canceled.
INFORMATION
■
Situations in which the curve speed reduction function may not operate
In situations such as the following, the curve speed reduction function may not operate:
● When the vehicle is being driven around a gentle curve
● When the accelerator pedal is being depressed
● When the vehicle is being driven around an extremely short curve
■
Changing the settings of the curve speed reduction function
Various settings of the curve speed reduction function can be changed through custom-
ize settings.
( → P.750)
Support for lane change
If your vehicle is being driven at approximately 50 mph (80 km/h) or more and
a lane change to the passing lane is performed, when the turn signal lever is
operated and the lane is changed, the vehicle will accelerate up to the set speed to
assist in overtaking.
The system’s recognition of which lane is the passing lane may be based solely on the
location of the steering wheel in the vehicle (left-hand drive/right-hand drive). If the vehicle
is driven in a location where the passing lane is on the opposite side of that where
the vehicle was originally sold, the vehicle may accelerate when the turn signal lever is
operated away from the passing lane. (e.g. The vehicle was manufactured for a right-hand
traffic location, but is being driven in a left-hand traffic location. The vehicle may accelerate
when the turn signal lever is operated to the right.)
6-2. Using the safe driving support functions
492