manualshive.com logo in svg

Lexus LS500h, Manual, Page: 69 / 524

Share
Download
Lexus LS500h Manual Download Page 69

69

1-4. Hybrid system

LS500h_OM_(U)_1810

1

For safety and security

There are air intake vents on each side 
of the rear seatback with the purpose 
of cooling the hybrid battery (traction 
battery). If the vents become blocked, 
hybrid battery output may be reduced.

When a certain level of impact is 
detected by the impact sensor, the 
emergency shut off system blocks the 
high voltage current and stops the fuel 
pump to minimize the risk of electrocu-
tion and fuel leakage. If the emergency 
shut off system activates, your vehicle 
will not restart. To restart the hybrid 
system, contact your Lexus dealer.

A message is automatically displayed 
when a malfunction occurs in the 
hybrid system or an improper opera-
tion is attempted.
If a warning message is shown on the 
multi-information display, read the 
message and follow the instructions.

■

If a warning light comes on, a warning 

message is displayed, or the 12-volt bat-

tery is disconnected

The hybrid system may not start. In this 

case, try to start the system again. If the 

“READY” indicator does not come on, con-

Hybrid battery (traction bat-
tery) air intake vents

NOTICE

■

Hybrid battery (traction battery) air 

intake vents

●

Make sure not to block the air intake 

vent with anything, such as a seat 

cover, plastic cover, or luggage. If the 

vents become blocked, the hybrid bat-

tery (traction battery) input and output 

may be restricted, leading to a reduc-

tion in hybrid battery (traction battery) 

output and a malfunction.

●

When dust etc. has accumulated in the 

air intake vent, periodically clean it 

with a vacuum cleaner to prevent the 

vent from clogging.

●

A filter is installed to the air intake vent. 

When the filter remains noticeably 

dirty even after cleaning the air intake 

vent, filter cleaning or replacement is 

recommended. When cleaning or 

replacing the filter, contact your Lexus 

dealer.

Refer to P.372 for details on how to 

clean the filters.

●

Do not get water or foreign materials 

in the air intake vents as this may cause 

a short circuit and damage the hybrid 

battery (traction battery).

Emergency shut off system

Hybrid warning message

Summary of Contents for LS500h













































































































































































































































































































































































































































































































































Reviews:

No comments