manualshive.com logo in svg

Lexus LS500h, Manual, Page: 373 / 524

Share
Download
Lexus LS500h Manual Download Page 373

373

6-1. Maintenance and care

LS500h_OM_(U)_1810

6

Mai
nte

na

nc

e a

nd

 c

are

■

Cleaning the air intake vent filters

1

Remove the grille.

2

Remove the filter.

3

Remove any dust and clogs from 
the filter using a vacuum cleaner, 
etc.

Make sure to also remove dust and clogs 

from the inner side of the air intake vent 

grille.
If the filter is damaged, have it replaced by 

your Lexus dealer.

4

Install the filter in its original posi-
tion, and then install the grille.

5

Start the hybrid system and check 
that “Maintenance Required for 
Traction Battery Cooling Parts See 
Owner’s Manual” is no longer dis-
played on the multi-information dis-
play.

It may take approximately 20 minutes after 

the hybrid system is started until the warn-

ing message disappears. If the warning 

message does not disappear, have the 

vehicle inspected by your Lexus dealer.

■

Scheduled maintenance of the air 

intake vent is necessary when

In some situations such as when the vehicle 

is used frequently or in heavy traffic or dusty 

areas, the air intake vent may need to be 

cleaned more regularly. 
For details, refer to “Owner’s Manual Sup-

plement” or “Scheduled Maintenance”.

■

Cleaning the air intake vents

●

If the vehicle is driven with the air intake 

vents and filters are clogged, the hybrid 

battery (traction battery) may not be 

cooled sufficiently, possibly causing an 

increase in the fuel consumption and 

damage to the hybrid battery (traction 

battery).

●

Improper handling of the air intake vent 

grilles and filters may result in damage to 

them. If you have any concerns about 

cleaning the filter, contact your Lexus 

dealer.

■

If “Maintenance Required for Traction 

Battery Cooling Parts See Owner’s 

Manual” is displayed on the multi-infor-

mation display

●

It is possible the air intake vents or filters 

are clogged due to accumulated dust. 

Clean the air intake vents and filters, 

referring to the cleaning method.

●

If the vehicle is driven continuously with 

this message displayed, the hybrid bat-

tery (traction battery) may not be cooled 

sufficiently, which may lead to the driving 

distance by the electric motor becoming 

shorter and damage to the hybrid battery 

(traction battery). Clean the air intake 

Summary of Contents for LS500h













































































































































































































































































































































































































































































































































Reviews:

No comments