Lexus LS500h, Manual, Page: 300 / 524

300
4-5. Using the driving support systems
LS500h_OM_(U)_1810
■
The vehicle height adjustment switch
can be used to change the mode when
The power switch is in ON mode.
■ System protection function
If the vehicle height is repeatedly increased
and decreased using the vehicle height
adjustment switch, etc., the system may not
operate temporarily.
In order to improve the ease of enter-
ing and exiting the vehicle, the vehicle
height will increase automatically.

Enter control
If any of the following operations are
performed, the vehicle height will
increase automatically:

When the doors are unlocked using
the smart access system with
push-button start

When the doors are unlocked using
the wireless remote control and
then a door is opened.
The vehicle height will increase by approxi-
mately 1.2 in. (30 mm) from its normal
position.
The vehicle height may not increase, if the
vehicle height already reaches the
selected height.
The vehicle will return to its normal height
when the vehicle speed reaches approxi-
mately 12 mph (20 km/h).

Exit control
When “Select Parking Height” is set to
“High”, the vehicle height will automati-
cally increase when the P shift position
is selected and a door is opened.
1
Press or to select .
2 Press or to select “Vehicle
Settings” and then press .
3
Press or to select
and then press .
4 Press or to select “Select
Parking Height” and then press
.
The vehicle height will increase by approxi-
mately 0.4 in. (10 mm) from its normal
position.
The vehicle height may not increase, if the
vehicle height already reaches the
selected height.
The vehicle will return to its normal height
when the vehicle speed reaches approxi-
mately 12 mph (20 km/h).
■
Enabling/Disabling access mode
1 Press the or meter control
switch to select .
2
Press the or meter control
switch to select “Vehicle Settings”
and then press
.
3 Press the or meter control
switch to select and then
press .
4 Press the or meter control
switch to select “Access Mode”
and then press
.
The setting will change between
enabled/disabled each time the
Vehicle height control when
entering/exiting the vehicle
(“Access Mode”)