manualshive.com logo in svg

Lexus LS500h, Manual, Page: 303 / 524

Share
Download
Lexus LS500h Manual Download Page 303

303

4-5. Using the driving support systems

LS500h_OM_(U)_1810

4

Driving

vehicle posture.
Also, the damping force changes 
depending on the selected driving 
mode. (

P.297)

■

LDH (Lexus Dynamic Handling 
system) (if equipped)

Provides integrated control of the 
VGRS, DRS and EPS. Contributes to 
turning characteristics at low speeds, 
responsiveness at medium speeds and 
safety at high speeds by controlling the 
steering angle of the front and rear 
wheels in accordance with the steering 
wheel operation and vehicle speed.

■

VDIM (Vehicle Dynamics Inte-
grated Management)

Provides integrated control of the 
ABS, brake assist, TRAC, VSC, 
hill-start assist control, EPS, VGRS (if 
equipped), DRS (if equipped) and 
Adaptive Variable Suspension System
Helps to maintain vehicle stability when 
swerving on slippery road surfaces by 
controlling the brakes, hybrid system 
output, steering assist, and steering 
ratio

■

When the TRAC/VSC/ABS systems are 

operating

The slip indicator light will flash while the 

TRAC/VSC/ABS systems are operating.

■

Disabling the TRAC system

If the vehicle gets stuck in mud, dirt or snow, 

the TRAC system may reduce power from 

the hybrid system to the wheels. Pressing 
the 

 switch to turn the system off may 

make it easier for you to rock the vehicle in 

order to free it.
To turn the TRAC system off, quickly press 
and release the 

 switch.

The “Traction Control Turned Off” will be 
shown on the multi-information display.

Press the 

 switch again to turn the sys-

tem back on.

■

Disabling both TRAC and VSC systems

To turn the TRAC and VSC systems off, 
press and hold the 

 switch for more 

than 3 seconds while the vehicle is stopped.
The VSC OFF indicator light will come on 
and the “Traction Control Turned Off” will 
be shown on the multi-information display.

*

Press the 

 switch again to turn the sys-

tem back on.

*

: On vehicles with PCS (Pre-Collision 

System), PCS will also be disabled (only 
Pre-Collision warning is available). The 
PCS warning light will come on and a 
message will be displayed on the 
multi-information display. (

P.222, 

230)

■

When the message is displayed on the 

multi-information display showing that 

TRAC has been disabled even if the 

 switch has not been pressed 

TRAC cannot be operated. Contact your 

Summary of Contents for LS500h













































































































































































































































































































































































































































































































































Reviews:

No comments