Lexus LS 500h 2019, Owner'S Manual

Page: 349 / 607

347
4
4-5. Using the driving support systems
Dr
ivin
g
When an object is detected, a graphic will
be displayed on the panoramic view moni-
tor (if equipped).
Use the meter control switches to ena-
ble/disable the Lexus parking
assist-sensor. (

P.135)
1 Press or to select .
2 Press or to select “PKSA”
and then press .
3 Press or to select and
then press .
When the Lexus parking assist-sensor
function is disabled, the Lexus parking
assist-sensor OFF indicator (

P.120)
illuminates.
To re-enable the system when it was
disabled, select on the multi-infor-
mation display, select and then On.
If disabled using this method, the sys-
tem will not be re-enabled by turning
the power switch off and then to ON
mode.
Turning Lexus parking assist-sen-
sor on/off
WARNING
■
When using the Lexus parking
assist-sensor
Observe the following precautions.
Failing to do so may result in the vehicle
being unable to be driven safely and pos-
sibly cause an accident.
●
Do not use the sensor at speeds in
excess of 10 km/h (6 mph).
●
The sensors’ detection areas and reac-
tion times are limited. When moving
forward or reversing, check the areas
surrounding the vehicle (especially the
sides of the vehicle) for safety, and
drive slowly, using the brake to control
the vehicle’s speed.
●
Do not install accessories within the
sensors’ detection areas.
●
The area directly under the bumpers is
not detected. Thin posts or objects
lower than the sensor may not be
detected when approached, even if
they have been detected once.
■
When to disable the function
In the following situations, disable the
function as it may operate even though
there is no possibility of a collision.
●
The vehicle is equipped with a fender
pole, wireless antenna or fog lights.
●
The front or rear bumper or a sensor
receives a strong impact.
●
A non-genuine Lexus suspension
(lowered suspension, etc.) is installed.
●
Towing eyelets are installed.
LS500h_OM_General_OM50J66E