Lexus LS 500h 2019, Owner'S Manual

Page: 559 / 607

557
8
8-1. Specifications
Vehic
le spe
cif
ic
at
ion
s
■
Oil capacity (Drain and refill [Ref-
erence
*
])
*
: The engine oil capacity is a reference
quantity to be used when changing the
engine oil. Warm up the engine and turn
off the hybrid system, wait more than 5
minutes, and check the oil level on the
dipstick.
■
Engine oil selection
“Toyota Genuine Motor Oil” is used in
your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor Oil”
or equivalent to satisfy the following
grade and viscosity.
Oil grade:
0W-20, 5W-20, 5W-30 and
10W-30:
API grade SL “Energy-Conserving”,
SM “Energy-Conserving”, SN
“Resource-Conserving” or SN PLUS
“Resource-Conserving”; or ILSAC
multigrade engine oil
15W-40:
API grade SL, SM, SN or SN PLUS
multigrade engine oil
Recommended viscosity (SAE):
Temperature range anticipated
before next oil change
If you use SAE 10W-30 or a higher vis-
cosity engine oil in extremely low tem-
peratures, the engine may become
difficult to start, so SAE 0W-20,
5W-20 or 5W-30 engine oil is recom-
mended.
Oil viscosity (0W-20 is explained here
as an example):
• The 0W in 0W-20 indicates the
characteristic of the oil which allows
cold startability. Oils with a lower
value before the W allow for easier
starting of the engine in cold
weather.
• The 20 in 0W-20 indicates the vis-
cosity characteristic of the oil when
the oil is at high temperature. An oil
Lubrication system
With filter
 2WD models (vehicles
without engine oil cooler)
5.7 L (6.0 qt., 5.0 Imp. qt.)
 2WD models (vehicles
with engine oil cooler)
5.8 L (6.1 qt., 5.1 Imp. qt.)
 AWD models
6.7 L (7.1 qt., 5.9 Imp. qt.)
Without fil-
ter
 2WD models
5.5 L (5.8 qt., 4.8 Imp. qt.)
 AWD models
6.4 L (6.8 qt., 5.6 Imp. qt.)
A
LS500h_OM_General_OM50J66E