Lexus 2016 IS 200t Service Manual Download Page 257

Page: 257 / 600

257

4-5. Using the driving support systems

iving

IS350/300/200t_U (OM53D18U)

■

The pre-collision system is operational when

The pre-collision system is enabled and the following conditions are met:

●

Pre-collision warning:
• Vehicle speed is greater than about 10 mph (15 km/h).

• The speed at which your vehicle is approaching the obstacle or the vehicle running

ahead of you is greater than about 10 mph (15 km/h).

●

Pre-collision brake assist:
• The VSC system is not disabled.

• Vehicle speed is greater than about 19 mph (30 km/h).

• The speed at which your vehicle is approaching the obstacle or the vehicle running

ahead of you is greater than about 19 mph (30 km/h).

• The brake pedal is depressed.

●

Pre-collision braking:
• The VSC system is not disabled.

• Vehicle speed is greater than about 10 mph (15 km/h).

• The speed at which your vehicle is approaching the obstacle or the vehicle running

ahead of you is greater than about 10 mph (15 km/h).

●

Suspension control (vehicles with Adaptive Variable Suspension System):
• Vehicle speed is greater than about 4 mph (5 km/h).

• The speed at which your vehicle is approaching the obstacle or the vehicle running

ahead of you is greater than about 19 mph (30 km/h).

■

Conditions that may trigger the system even if there is no danger of a collision

In any of the following situations where the frontal area of the radar sensor is interrupted,

the radar sensor may detect possibility of a frontal collision and the system may be acti-

vated.

●

When passing by an oncoming vehicle in a curve or a turn to the right or the left.

●

When rapidly approaching an obstacle ahead (e.g. preceding vehicle, toll gate barrier,

etc.)

●

When there is a structural object (billboard, low ceiling, fluorescent light, etc.) above

the uphill road ahead

●

When driving on a narrow road or through under a low overhead structure (bridge,

tunnel, fly-under, etc.)

●

When driving on an uneven road surface

●

When there is a metal object, bump, or protrusion on the road surface

●

When vehicle’s front part is raised or lowered depending on loading conditions

●

When the direction of radar sensor is misaligned by strong impact applied on an area

around the radar sensor, etc.

●

When there is an obstacle (guard rail, etc.) by the roadside at the entrance to a curve

●

When the front of your vehicle is pointing upwards (caused by putting a heavy load in

the trunk etc.)

When the system is activated in the situations described above, there is also a possibility

that the brakes may be applied with a force greater than normal.

Summary of Contents for 2016 IS 200t

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2016 IS 200t

Reviews:

Related manuals for 2016 IS 200t

Brands by name

Popular brands

Lexus 2016 IS 200t, Service Manual

Search results

Summary of Contents for 2016 IS 200t

Reviews:

Related manuals for 2016 IS 200t

Brands by name

Popular brands