Lexus 2016 IS 200t Service Manual Download Page 229

Page: 229 / 600

229

4-5. Using the driving support systems

iving

IS350/300/200t_U (OM53D18U)

■

If a message is displayed on the multi-information display



P. 484

■

Certification



For vehicles sold in the U.S.A.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions; (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.



For vehicles sold in Canada

This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme a la norme NMB-001 du Canada.

CAUTION

■

When using the intuitive parking assist

Observe the following precautions.

Failing to do so may result in the vehicle being unable to be driven safely and possibly

cause an accident.

●

Do not use the sensor at speeds in excess of 6 mph (10 km/h).

●

The sensors’ detection areas and reaction times are limited. When moving forward or

reversing, check the areas surrounding the vehicle (especially the sides of the vehi-

cle) for safety, and drive slowly, using the brake to control the vehicle’s speed.

●

Do not install accessories within the sensors’ detection areas.

NOTICE

■

When using intuitive parking assist

In the following situations, the system may not function correctly due to a sensor mal-

function etc. Have the vehicle checked by your Lexus dealer.

●

The intuitive parking assist operation display flashes, and a beep sounds when no

obstacles are detected.

●

If the area around a sensor collides with something, or is subjected to strong impact.

●

If the bumper or grille collides with something.

●

If the display shows continuously without beeping, except when the buzzer mute

switch has been turned on.

●

If a display error occurs, first check the sensor.

If the error occurs even when there is no ice, snow or mud on the sensor, it is likely that

the sensor is malfunctioning.

■

Notes when washing the vehicle

Do not apply intensive bursts of water or steam to the sensor area.
Doing so may result in the sensor malfunctioning.

Summary of Contents for 2016 IS 200t

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2016 IS 200t

Reviews:

Related manuals for 2016 IS 200t

Brands by name

Popular brands

Lexus 2016 IS 200t, Service Manual

Search results

Summary of Contents for 2016 IS 200t

Reviews:

Related manuals for 2016 IS 200t

Brands by name

Popular brands