393
6-4. Using the other interior features
6
Inte
rior fe
ature
s
IS350/300/200t_U (OM53D18U)
■
Programming HomeLink
®
Point the remote control transmit-
ter for the device 1 to 3 in. (25 to
75 mm) from the HomeLink
®
buttons.
Keep the HomeLink
®
indicator light
in view while programming.
For U.S.A. owner’s
Press and hold the HomeLink
®
button you want to program and
the handheld transmitter button
simultaneously. When the
HomeLink
®
indicator light
changes from a slow to a rapid
flash, you can release both but-
tons.
Programming has completed when the indicator light changes to a rapid flash.
Programming an entry gate (for U.S.A. owners)/Programming a device in the
Canadian market
With one hand, press and hold the HomeLink
®
button you want to pro-
gram. With your other hand, press and release the remote control transmit-
ter every 2 seconds and repeat this cycle until the HomeLink
®
indicator
light starts to flash rapidly. Then, release the buttons.
Test the HomeLink
®
operation by
pressing the newly programmed
button and observing the indica-
tor light:
●
If the indicator light is solid/
continuous, programming has
been completed and your
device should activate when
the HomeLink
®
button is
pressed and released.
●
If the indicator light blinks rapidly for 2 seconds and then turns into a
solid/continuous light, proceed with the following instructions for
programming a rolling code system.
1
2
2
3
4
Summary of Contents for 2016 IS 200t
