Lexmark XM5163, Repair Manual

Page: 39 / 510

Note: 110V units print letter size while 220V units print A4 size.
3
Register the flatbed:
a
Open the ADF, and then remove the flatbed glass cushion (A).
b
Place the glass cushion on the flatbed scanner glass with its Velcro pads facing up, and aligning it squarely in
the corner where the green arrow is located.
c
Lower the ADF down onto the scanner glass, and then raise the ADF up again to pick up the glass cushion.
d
Run your hand across the glass cushion to make sure it is attached.
4
Place the target page face down on the scanner glass.
Note: Make sure the paper is properly aligned on the scanner glass. The back left corner of the paper should
align squarely with the green arrow on the scanner glass.
5
Lower the ADF down and then select Quick Copy Test .
7463
Repair information
409