3-42
Service Manual
7526
Go Back
Previous
Next
Motor Calibration
This setting synchronizes the aligner and fuser motor speeds with the transfer belt speed to ensure that the
output is printed correctly.
Note:
This test should be run at 600 dpi resolution and with duplex disabled.
To run the Motor Calibration:
1.
Touch
Motor Calibration
in the Config Menu.
2.
Touch
Motor Calibration
.
Calibrating…
displays, and then the multiple function printer feeds eight blank pages.
Touch
Back
to return to the Configuration main menu.
Paper Prompts
Controls the source the printer selects for a change paper source message. The printer displays the change
paper source message based on the size of the paper requested and not by the paper type.
Selections include
Auto
,
Multi-Purpose Feeder
, and
Manual Paper
. The multipurpose feeder is available on
some printer models.
Note:
If the Configure MP setting is changed to Manual, a power-on reset is performed, and then the value of
the Paper Prompts menu item before the power-on reset was MP Feeder, then when the printer restarts, the
printer automatically changes the Paper Prompts setting to Manual Paper.
Load Manual overrides that would result in a change paper message are disabled for
Paper
or
Env
prompts that
are set to Manual, Manual Paper, or Manual Env.
To change the settings for Paper Prompts:
1.
Touch
Paper Prompts
in the Config Menu.
2.
Touch the left or right arrow to toggle between
Auto
,
Multi-Purpose Feeder
, and
Manual Paper
.
3.
Touch
Submit
.
Submitting changes…
is displayed.
You are automatically returned to the Configuration main menu.
Envelope Prompts
Controls the source the printer selects for a change envelope source message. The printer displays the change
envelope message based on the size of the envelope requested and not by the envelope type.
Selections include Auto, MP Feeder, and Manual Env. MP Feeder is only available on some printer models.
Note:
If the Configure MP setting is changed to Manual, and a power-on reset is performed, and the value of
the Env Prompts menu item before the power-on reset was MP Feeder, then when the printer restarts, the
printer automatically changes the Env Prompt setting to Manual Env.
Load Manual overrides that would result in a change paper message are disabled for Paper or Env prompts that
are set to Manual, Manual Paper, or Manual Env.
Summary of Contents for X734DE
