Lexmark X642E - X642E Manual Download

Page: 96 / 121

Copy, e-mail, fax, FTP, and scan button messages

Attendance messages

Attendance messages indicate errors that the user may need to resolve before continuing to print, scan, fax, e-mail, or use
FTP.

Message

Meaning

Action

Insufficient resources. Try again
when the system is idle.

There are not enough system
resources at this time.

Try again after the current job is
complete.

System busy, preparing resources
for job.

Not all resources needed for the job
are available.

Wait for the message to clear.

System busy, preparing resources
for job. Deleting held job(s).

Not all resources needed for the job
are available. Some held jobs are
deleted to free system memory.

Wait for the message to clear.

Message

Meaning

Action

An error has occurred
with the Flash Drive.
Please remove and re-
insert the drive.

An electrical charge causes the flash
drive to reset rapidly. To clear the
message, remove and then reinsert
the drive.

Remove the flash drive, and then reinsert it.

Change [src] to [Custom
String]

Lets the user override the current
print media source for the remainder
of the print job. The formatted page
prints as is on the print media
installed in the tray. This may cause
clipping of text or images.

Touch

Use current [src]

to ignore the message

and print on the print media loaded in the tray.

Touch

Continue

• which continues the job if the correct size and

type are loaded in the tray, and this size and
type are specified in the

Paper Menu

using

the LCD.

• which is ignored if there is no print media in

the tray.

Touch

Cancel Job

to cancel the current job if

needed.

Change [src] to [Custom
Type Name]

New print media is required to finish a
print job.

Load the indicated source with the requested
size and type of print media.

Touch

Continue

to print with the print media

currently in the tray.

Change [src] to [size]

Touch

Use current [src]

to ignore the message

and print on the print media loaded in the tray.

Touch

Continue

• which continues the job if the correct size and

type are loaded in the tray, and this size and
type are specified in the

Paper Menu

using

the LCD.

• which is ignored if there is no print media in

the tray.

Touch

Cancel Job

to cancel the current job if

needed.

Summary of Contents for X642E - X642E


























































































































Search results

Summary of Contents for X642E - X642E

Reviews:

Related manuals for X642E - X642E

Brands by name

Popular brands

Lexmark X642E - X642E, Manual

Search results

Summary of Contents for X642E - X642E

Reviews:

Related manuals for X642E - X642E

Brands by name

Popular brands