Lexmark X642E - X642E Manual Download

Page: 105 / 121

105

Attendance messages

58 Too many flash
options installed

The MFP detects an excess of
optional flash memory cards installed.

Touch

Continue

to clear the message and

ignore the extra optional flash memory cards.

The message occurs again unless the excess
optional flash memory cards are removed.

Turn the MFP off.

Unplug the power cord from the wall outlet.

Remove the excess flash memory.

Connect the power cord to a properly
grounded outlet.

Turn the MFP on.

58 Too many trays
attached

The MFP detects that too many
optional drawers and their matching
trays are installed.

Turn the MFP off.

Unplug the power cord from the wall outlet.

Remove the additional drawers.

Connect the power cord to a properly
grounded outlet.

Turn the MFP on.

59 Incompatible duplex

An unsupported optional duplex unit
is attached to the MFP.

Remove the optional duplex unit.

The MFP ceases normal functions until the
optional duplex unit is removed.

Touch

Continue

to clear the message once the

optional duplex unit is removed.

59 Incompatible envelope
feeder

An unsupported optional envelope
feeder is attached to the MFP.

Remove the optional envelope feeder.

The MFP ceases normal functions until the
optional envelope feeder is removed.

Touch

Continue

to clear the message once the

optional envelope feeder is removed.

59 Incompatible tray [x]

An unsupported optional drawer and
its matching tray are attached to the
MFP.

Remove the optional drawer.

The MFP ceases normal functions until the
optional drawer is removed.

Touch

Continue

to clear the message once the

optional drawer is removed.

80 Scheduled maintenance
advised

Service is required to maintain printer
performance.

Touch

Continue

to clear the message and

continue printing. Order the necessary
maintenance items.

Replace the maintenance items to ensure
optimal print performance, and if necessary,
reset the MFP maintenance counter.

88 Toner is low

The print cartridge is running low on
toner.

Replace the print cartridge if the toner low alarm
sounds.

Touch

Continue

to clear the message if the

toner low alarm does not sound.

200.yy Paper jam, check
[area name]. Leave paper
in bin.

There is a single jam in the specified
area indicated by

area name

Open the upper and lower front doors.

Remove the print cartridge to access the jam,
and clear it.

Close the doors.

Touch

Continue

. If all print media is cleared

from the path, the job resumes printing.

Message

Meaning

Action

Summary of Contents for X642E - X642E


























































































































Search results

Summary of Contents for X642E - X642E

Reviews:

Related manuals for X642E - X642E

Brands by name

Popular brands

Lexmark X642E - X642E, Manual

Search results

Summary of Contents for X642E - X642E

Reviews:

Related manuals for X642E - X642E

Brands by name

Popular brands