Lexmark X642E - X642E Manual Download

Page: 109 / 121

109

Attendance messages

290.10 Scanner jam,
remove jammed originals
from the scanner

The scanner detects an original
document jam at the first scanning
sensor while the scanner is idle.

Page level recovery is active.

Clear the jam from the scanner to clear the
message. Page recovery completes.

291.00 Scanner jam,
remove all originals
from the scanner

The scanner detects an original
document jam at the second scanning
sensor while the scanner is idle.

Job level recovery is active.

Clear the jam from the scanner to clear the
message. Job recovery completes.

291.00 Scanner jam,
remove jammed originals
from the scanner

The scanner detects an original
document jam at the second scanning
sensor while the scanner is idle.

Page level recovery is active.

Clear the jam from the scanner to clear the
message. Page recovery completes.

291.01 Scanner jam,
remove all originals
from the scanner

The scanner detects an original
document jam at the first scanning
sensor.

Job level recovery is active.

Clear the jam from the scanner to clear the
message. Job recovery completes.

291.01 Scanner jam,
remove jammed originals
from the scanner

The scanner detects an original
document jam at the first scanning
sensor.

Page level recovery is active.

Clear the jam from the scanner to clear the
message. Page recovery completes.

291.02 Scanner jam,
remove all originals
from the scanner

The scanner detects an original
document jam at the second scanning
sensor.

Job level recovery is active.

Remove all original documents from the
scanner to clear the jam. The message clears.

291.02 Scanner jam,
remove jammed originals
from the scanner

The scanner detects an original
document jam at the second scanning
sensor.

Page level recovery is active.

Remove all original documents from the
scanner to clear the jam. The message clears.

292 Scanner jam, remove
all originals from the
scanner

The ADF cover is open while the ADF
is feeding the original document.

Job level recovery is active.

Remove all original documents from the
scanner to clear the jam. The message clears.

292 Scanner jam, remove
jammed originals from
the scanner

The ADF cover is open while the ADF
is feeding the original document.

Page level recovery is active.

Remove all original documents from the
scanner to clear the jam. The message clears.

Message

Meaning

Action

Summary of Contents for X642E - X642E


























































































































Search results

Summary of Contents for X642E - X642E

Reviews:

Related manuals for X642E - X642E

Brands by name

Popular brands

Lexmark X642E - X642E, Manual

Search results

Summary of Contents for X642E - X642E

Reviews:

Related manuals for X642E - X642E

Brands by name

Popular brands