manualshive.com logo in svg

Lexmark Photo Jetprinter 5770, User Manual

Share
Download
Lexmark Photo Jetprinter 5770 User Manual Download Page 33

Caring for your print cartridges

27 

Caring for your print cartridges

Aligning the print cartridges

Use the printer software to align the print cartridges 
when:

•

You install the printer software on your computer.

•

You re-connect the printer to your computer - even 
if you have aligned them from the operator panel.

•

You are using optional Black and Color print 
cartridges, and the black portions of a graphic or 
text do not align properly with the color portions. 

Below are examples of aligned and misaligned print 
cartridges: 

To align your print cartridges for best print quality:

1

From the printer’s Control Program, click the 

Cartridges Tab

.

For help opening the Control Program, see 
“Opening the Control Program” on page 8.

2

Click the 

Align Cartridges

 button.

Aligned

Misaligned

5700.book : cartrdge.fm  Page 27  Thursday, July 16, 1998  3:49 PM

Summary of Contents for Photo Jetprinter 5770

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands