Lexmark Photo Jetprinter 5770 Page 18 User Manual Download

Page: 18 / 96

Loading paper and other media

Loading paper and other media

Envelope types and sizes

The printer supports the following envelope sizes and
card types:

Do not use envelopes that have:

•

Windows, holes, perforations, cutouts, or deep
embossing

•

A metal clasp, a string tie, or metal folding bars

•

Peel-off sealing strips

•

Contents enclosed

Transparency types and sizes

The printer supports letter and A4-size transparencies.
Use transparencies designed for an inkjet printer, such as
the following:

Do not use transparencies designed for copiers, laser
printers, or pen plotters.

For best results:

•

Handle only on the edges. Do not touch the side
being printed on.

•

Store unused paper in the original packaging.

•

Do not store in excessively hot or humid areas.

•

Feed transparencies one sheet at a time.

Envelope Sizes

Card Types

•

6 3/4

•

7 3/4

•

#10

•

Baronial

•

Postcard

•

Index card

Type

Size

Part number

Transparency

Letter

(20-pack)

1402797

1402798

5700.book : loadpapr.fm Page 12 Thursday, July 16, 1998 3:49 PM

Summary of Contents for Photo Jetprinter 5770

































































































Search results

Summary of Contents for Photo Jetprinter 5770

Reviews:

Related manuals for Photo Jetprinter 5770

Brands by name

Popular brands

Lexmark Photo Jetprinter 5770, User Manual

Search results

Summary of Contents for Photo Jetprinter 5770

Reviews:

Related manuals for Photo Jetprinter 5770

Brands by name

Popular brands