Lexmark Optra Color 40, Service Manual

Page: 63 / 95

Repair Information
4-21
4092-010
Rear Cover Removal
1. Remove the front cover.
2. Remove the controller board cover.
3. Disconnect the cables from the controller board and remove the
board.
4. Place a screwdriver in slot [A] and release the cover latches.
5. Slide the cover up and off the printer.
6. To reassemble, place the cover over the tabs in the bottom
cover and press down until the cover latches. Be sure the
parallel connector snaps do not get trapped behind the
controller board cover.
Right Side Frame Assembly Removal
1. Remove the front cover.
2. Remove the rear cover.
3. Remove the carrier frame assembly.
4. Remove the paper load door and manual insert tray.