Lexmark Optra 4049 Series, Service Manual

Page: 30 / 194

2-3
4049-XXX
30 Top Cover Open or Print
Cartridge Missing Make sure the spring-mounted pin
on the printhead shroud is installed
properly and that it is detected by the
ramp on the print cartridge as the
cover closes. The pin should enter
the tower on the HVPS and depress
the cover switch.
32 Wrong Print Cartridge
installed The installed print cartridge is not
supported by the Optra printer.
37 Insufficient Collation Mem-
ory Memory is too full to collate the print
job.
38 Memory Full Memory used to store pages is full.
To verify that the printer recognizes
all the installed memory, go to the
user menus and print the “Print
Menus” test page. Make sure the
memory shown on the printout
matches the installed memory.
39 Complex Page Page too complex to print.To verify
that the printer recognizes all the
installed memory, go to the user
menus and print the “Print Menus”
test page. Make sure the memory
shown on the printout matches the
installed memory.
43 Font Card Not Supported Font card format not supported by
printer.
44 Defective Font Card Defective font card installed in font
slot.
47 Font Card Removed While
Printing Printer needs data on removed card.
51 Defective Flash The printer detects a defective Flash
SIMM. If the error recurs replace the
Flash SIMM.
52 Flash Full Not enough flash memory for data
requested to be stored.
53 Unformatted Flash Flash problem at POR or while
attempting to write.
Error Code Explanation