Diagnostic Information 2-4
4049-XXX
54 Serial Error
Framing or parity error on serial.
56 Serial Port Disabled or, Par-
allel Port Disabled
Data has been sent to a port which
has been disabled in the Setup
Menu. The port can be reactivated
by entering the customer setup
menu and selecting Serial Setup or
Parallel Setup, Serial Buffer or Paral-
lel Buffer, and changing the setting
from Disabled to Auto.
57 Check Duplex Connection
The duplex unit has been electrically
disconnected from the printer but the
printer top cover is not open. Check
the auto-connect plugs on the duplex
unit and the printer.
58 Duplex Not Attached
Duplex is no longer connected, and
printer top cover is closed.
59 Duplex Cover Open
Top cover of duplex unit is sensed
open.
62 Disk Full
Not enough disk space for data that
has been requested to be written to
disk.
63 Unformatted Disk
Format the disk.
64 Defective Disk
The printer will ignore a disk it
senses as defective. Run the Quick
Disk Test. If the test fails, the disk is
defective or the data on track 1 is
bad. If the Quick Disk Test passes
but the disk does not work, run the
Disk Test/Clean (2 hour test).
Replace the disk if instructed by the
operator panel.
7X Network Card Codes
These user codes are documented
in various network card user manu-
als. See
80 Scheduled Maintenance
Printer has reached 200,000 prints
without maintenance count reset.
Refer to
.
Error Code
Explanation
Summary of Contents for Optra 4049 Series
