Lexmark Optra 4044-XXX Service Manual Download Page 70 | Manualshive

Page: 70 / 154

background image

3-12

Service Manual

4044-XXX

4. When the Error LED comes on solid, double-click the opera-

tor panel button.

5. Once the Error and Press Button LEDs start to blink, close

the top cover.

6. The Ready LED comes on solid and the Error and Press

Button LEDs continue blinking.

7. Double-click the operator button three times. The Paper Jam

LED comes on solid while the Error and Press Button LEDs
continue blinking.

8. Perform a long button press until all LEDs come on solid.

The printer is in Hex Trace mode

9. To exit the Hex Trace mode, turn the printer power off.

Restoring Factory Defaults

Restoring factory defaults returns the printer settings to the original
factory settings.

Perform the following steps to invoke factory defaults:

1. Turn the printer power off.

2. Open the top cover.

3. Turn the printer power on.

4. When the Error LED comes on solid, double-click the opera-

tor panel button.

5. Once the Error and Press Button LEDs start blinking, close

the top cover.

6. The Ready LED comes on solid and the Error and Press

Button LEDs continue blinking.

7. Double-click the operator button one time. The Data LED

comes on solid while the Error and Press Button LEDs con-
tinue blinking.

8. Perform a long button press until all LEDs come on solid.

9. The printer is reset to factory defaults.

«
...
68
69
70
71
72
...
»

Summary of Contents for Optra 4044-XXX



























































































































































Reviews:

No comments

Related manuals for Optra 4044-XXX

Brand: IBM Pages: 112

Brand: DataCard Pages: 17

Brand: DataCard Pages: 24

Brand: IBM Pages: 102

Brand: NCR Pages: 2

imageRUNNER ADVANCE DX 6870i

Brand: Canon Pages: 115

imagerunner advance C5550i

Brand: Canon Pages: 1556

WorkCentre XD Series

Brand: Xerox Pages: 63

Brand: Citizen Pages: 4

Brand: Alunar Pages: 6

Brand: Xerox Pages: 2

HP Toner Cartridges 6R941

Brand: Xerox Pages: 2

Brand: Xerox Pages: 4

Brand: SPRT Pages: 18

Brand: Renkforce Pages: 44

Brand: Citizen Pages: 88

Brand: Konica Minolta Pages: 36

Brand: Epson Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands