Lexmark Optra 4044-XXX Service Manual Download Page 2 | Manualshive

Page: 2 / 154

background image

Edition: May 2001

The following paragraph does not apply to any country where such provisions are
inconsistent with local law

: LEXMARK INTERNATIONAL, INC. PROVIDES THIS

PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do
not allow disclaimer of express or implied warranties in certain transactions; therefore, this
statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are
periodically made to the information herein; these changes will be incorporated in later
editions. Improvements or changes in the products or the programs described may be
made at any time.

A form for reader’s comments is provided at the back of this publication. If the form has
been removed, comments may be addressed to Lexmark International, Inc., Department
D22A/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. Lexmark
may use or distribute any of the information you supply in any way it believes appropriate
without incurring any obligation to you. You can purchase additional copies of publications
related to this product by calling 1-800-553-9727. In other countries, contact your point of
purchase.

Lexmark and Optra are trademarks of Lexmark International, Inc., registered in the United
States and/or other countries.

Other trademarks are the property of their respective owners.

© Copyright Lexmark International, Inc. 2000, 2001.
All rights reserved.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS

This software and documentation are provided with RESTRICTED RIGHTS. Use,
duplication or disclosure by the Government is subject to restrictions as set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at
DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc.,
Lexington, KY 40550.

4044-XXX

«
1
2
3
4
...
»

Summary of Contents for Optra 4044-XXX



























































































































































Reviews:

No comments

Related manuals for Optra 4044-XXX

Brand: EBS Pages: 4

Brand: NCR Pages: 38

Brand: Oki Pages: 36

Brand: Oki Pages: 3

JG Titan MKII V2

Brand: iBox Pages: 5

Brand: Xerox Pages: 532

Brand: Xerox Pages: 174

Phaser 6115 MFP

Brand: Xerox Pages: 2

Phaser 6115 MFP

Brand: Xerox Pages: 219

Brand: Xerox Pages: 5

Brand: Xerox Pages: 3

Phaser 6128 MFP

Brand: Xerox Pages: 2

Phaser 6128 MFP

Brand: Xerox Pages: 16

Brand: Xerox Pages: 2

Brand: Xerox Pages: 9

Brand: Xerox Pages: 12

Brand: Xerox Pages: 2

Brand: Xerox Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands