Scanner jam, remove jammed originals from the scanner [2yy.xx]
Remove the jammed paper from the scanner.
SMTP server not set up. Contact system administrator.
From the printer control panel, press
to clear the message.
Note:
If the message appears again, then contact your system support person.
Standard network software error [54]
Try one or more of the following:
•
From the printer control panel, select
Continue
to continue printing. For non
‑
touch
‑
screen printer models, press
to confirm.
•
Turn off the printer and then turn it back on.
•
Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web
site at
http://support.lexmark.com
.
Standard USB port disabled [56]
From the printer control panel, select
Continue
to clear the message. For non
‑
touch
‑
screen printer models, press
to confirm.
Notes:
•
The printer discards any data received through the USB port.
•
Make sure the USB Buffer menu is not set to Disabled.
Supply needed to complete job
Try one or more of the following:
•
From the printer control panel, touch
Prompt for supplies
to view all error messages that indicate what supplies
are needed to continue processing the current job. For non
‑
touch
‑
screen printer models, press
to clear the
message and continue printing.
1
Order the missing supply immediately.
2
Install the supply. For more information, see the instruction sheet that came with the supply.
•
Cancel the print job, then install the missing supply, and then resend the print job.
Too many flash options installed [58]
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the extra flash memory.
Troubleshooting
190
