•
Select
Finish job without further scanning
, and then press
to end the last successful scan job.
Note:
This does not cancel the scan job. All successfully scanned pages will be processed further for copying or
e-mailing.
•
Select
Restart Job
, and then press
to restart the scan job with the same settings from the previous scan job.
•
Select
Cancel Job
, and then press
to clear the message and cancel the scan job.
Replace defective [type] imaging kit [31.xy]
Note:
The type can be a black imaging kit, or a black and color imaging kit.
Replace the defective imaging kit to clear the message and continue printing. For more information, see the instruction
sheet that came with the supply.
Note:
If you do not have a replacement imaging kit, then see the “Ordering supplies” section of the
User’s Guide
or
visit
www.lexmark.com
.
Replace jammed originals if restarting job.
From the printer control panel, try one or more of the following:
•
Select
Scan from automatic feeder
, and then press
to continue scanning from the ADF immediately after the
last successful scan job.
•
Select
Scan from flatbed
, and then press
to continue scanning from the scanner glass immediately after the
last successful scan job.
•
Select
Finish job without further scanning
, and then press
to end the last successful scan job.
Note:
This does not cancel the scan job. All successfully scanned pages will be processed further for copying or
e-mailing.
•
Select
Restart Job
, and then press
to restart the scan job with the same settings from the previous scan job.
•
Select
Cancel Job
, and then press
to clear the message and cancel the scan job.
Replace maintenance kit, 0 estimated pages remain [80.xy]
The printer is scheduled for maintenance. For more information, visit the Lexmark support Web site at
http://support.lexmark.com
or contact your service representative, and then report the message.
Replace missing [type] imaging kit [31.xy]
Note:
The type can be a black imaging kit, or a black and color imaging kit.
Install the indicated imaging kit to clear the message. For more information, see the “Replacing supplies” section of
the
User’s Guide
.
Troubleshooting
188
